Biodegradation of α and β Endosulfan in Soil as Influenced by Application of Different Organic Materials

Abstract

A laboratory pot experiment was conducted to study the effect of amending soil with four different sources of organic matter on the degradation rate of α and β endosulfan isomers. Poultry by-product meal, poultry manure, dairy manure, and municipal solid waste compost were cured, dried, ground (<1 mm) and thoroughly mixed with a calcareous soil at a rate of 2% and placed in plastic pots. Endosulfan was added at the rate of 20 mg kg^?1. The moisture level was kept near field capacity and the pots were kept at room temperature. Soil sub-samples, 100 g each, were collected from every pot at days 1, 8, 15, 22, 29, 43, and 57 for the measurement of endosulfan isomers. Endosulfan residues were extracted from the soil samples with acetone. The supernatant was filtered through anhydrous sodium sulphate, 5 mL aliquot was diluted to 25 mL with hexane, mixed well, and then two sub-samples from the filtrates were analyzed for α and β endosulfan isomers by gas chromatography. The results indicated that the half-life (T _½) of α-endosulfan in the poultry by-product meal treatment was 15 days compared to about 22 days in the other treatments. The T _½ of β-endosulfan was 22 days in the poultry by-product meal treatment and followed a bi-phasic pattern, 57 days in the municipal solid waste compost treatment and the extrapolated T _½ was about 115 days for the other three treatments.     

Environmental monitoring of complex hydrocarbon mixtures in water and soil samples after solid phase microextraction using PVC/MWCNTs nanocomposite fiber

A novel nanocomposite based on incorporation of multiwalled carbon nanotubes (MWCNTs) in polyvinyl chloride (PVC) was prepared. Proposed nanocomposite was coated on stainless steel wire by deep coating. Composition of nanocomposite was optimized based on results of morphological studies using scanning electron microscopy. The best composition (83% MWCNTs:17% PVC) was applied as a solid phase microextraction fiber. Complex mixture of aromatic (BTEX) and aliphatic hydrocarbons (C₅–C₃₄) were selected as model analytes, and performance of proposed fiber in extraction of the studied compounds from water and soil samples was evaluated. Analytical merits of the method for water samples (LODs = 0.10–1.10 ng L⁻¹, r² = 0.9940–0.9994) and for soil samples (LODs = 0.10–0.77 ng kg⁻¹, r² = 0.9946–0.9994) showed excellent characteristics of it in ultra trace determination of petroleum type environmental pollutants. Finally, the method was used for determination of target analytes in river water, industrial effluent and soil samples.     

Highly active mixed-phase TiO2 photocatalysts fabricated at low temperature and the correlation between phase composition and photocatalytic activity

The idea of varying volume ratio of water to ethanol in solvent was firstly employed to yield phase composition controllable mixedphase titanium dioxide (TiO2) photocatalysts via a low temperature solvothermal route at 353 K. It was found that anatase contents increase from 0 to 100% with increase of ethanol contents in solvent. The mixed-phase TiO2 with 60% anatase content exhibited the best photocatalytic activity in photodecomposing formaldehyde (FAD) under UV light irradiation, which increases by about ...     

厌氧-好氧生物反应器填埋工艺特性研究

基于生物反应器填埋技术,研究1种填埋场地循环操作的厌氧-好氧生物反应器填埋工艺,设计了该工艺模拟装置并研究了其运行工艺特性.厌氧阶段主要通过渗滤液回灌控制反应器工艺条件,主要试验结果为,pH值,R1在 6周后可上升至6.7～7.8,R2在17周内一直低于6.8;渗滤液COD浓度,R1在13周时下降至10?617 mg/L,R2在5周后上升至60?000 mg/L后长期趋于稳定;填埋气累计产量,R1在8周达到44%,R2几乎不产气.衡量稳定化可以分别采用渗滤液pH、COD浓度及BOD₅/COD的减少率、填埋气的累计产率等指标来判断,并据此转换为好氧填埋运行.好氧阶段主要是通过强制通风来减少恶臭和水分,主要试验结果为,通风19d氨气浓度降为1.16 mg/m³,通风23d后恶臭浓度降为19;通风14d后含水率降为26%.完成此阶段的工艺指标值可依据矿化垃圾开采的最终用途确定.对主要试验数据进行了数值模拟.厌氧-好氧填埋过程的微生物演替经RISA分析,有4个优势菌群,一些兼性菌群在厌氧-好氧阶段起着重要的承前启后作用.     

电石渣理化性质的分析与表征

电石渣是电石水解获取乙炔气后产生的一种工业废渣。文章采用SEM、XRD和DSC/TG等现代测试手段,对其理化性质进行分析和表征,结果表明:电石渣是由一些十分细微颗粒组成,其化学成分主要是CaO,其次是Al2O3、SiO2等。电石渣中微量元素未超过排放标准、放射性符合建筑主体材料技术要求。电石渣是以Ca(OH)2为主晶相,并含有少量CaCO3。     

徐闻珊瑚礁保护区海水中多环芳烃的初探

2006年8月,对徐闻珊瑚礁自然保护区中多环芳烃的污染现状进行调查和研究,采用固相萃取,GC-MS检测,分析其中16种多环芳烃（PAHs）单体的含量,结果表明该海域海水中16种PAHs的总平均含量为87.06±90.62 ng·L^-1,变化范围为43.31～435.64 ng·L^-1,与世界其它一些近岸海区海水中的PAHs含量相比污染较为严重。A1站位的PAHs含量偏高,主要来源于陆地的工业废水和生活污水以及渔船油污。PAHs含量的增多对珊瑚礁生态系统具有一定影响,最终将影响到人类的自身健康。     

TiO2 nanotubes as solid-phase extraction adsorbent for the determination of polycyclic aromatic hydrocarbons in environmental water samples

An analytical method based on TiO2 nanotubes solid-phase extraction (SPE) combined with gas chromatography (GC) was established for the analysis of seven polycyclic aromatic hydrocarbons (PAHs): acenaphtylene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene and pyrene. Factors a ecting the extraction e ciency including the eluent type and its volume, adsorbent amount, sample volume, sample pH and sample flow rate were optimized. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method. Under the optimized extraction conditions, the method showed good linearity in the range of 0.01–0.8 g/mL, repeatability of the extraction (RSD were between 6.7% and 13.5%, n = 5) and satisfactory detection limits (0.017–0.059 ng/mL). The developed method was successfully applied to the analysis of surface water (tap, river and dam) samples. The recoveries of PAHs spiked in environmental water samples ranged from 90% to 100%. All the results indicated the potential application of titanate nanotubes as solid-phase extraction adsorbents to pre-treat water samples.     

用GC/MS分析火灾后苯板产生固体废物中的有机物

采用GC/MS方法对某苯板厂火灾后产生的固体废弃物进行检测分析.结果表明,在苯板火灾后产生的固体废弃物中检测出61种化合物,其中被美国EPA列入优先污染物的苯系物、萘和蒽等占总有机物12.2％.     

影响三沟式氧化沟脱氮效果的2个重要参数

运行周期中反硝化运行和硝化运行的时间比ｔＤＮ／ｔＮ是平衡处理系统反硝化,硝化能力的重要参数,实验室条件下分别比较了ｔＤＮ／ｔＮ为０．２７,０．４０,０．４７,０．７５和１．０的５种不同组合的运行效果。结果表明,当ｔＤＮ／ｔＮ为０．４０时,即硝化能力略大于反硝化潜能时,脱氮效果最好。     

空气中粉尘粒子的侧向散射效应研究

目的从米散射的基本理论出发。对有关的粉尘粒径的米散射效应进行研究。方法所用的方法主要通过对米散射理论的深入学习、研究,运用Matlab编程软件对0~5μm之间的微粒进行散射光强和散射相函数的计算,得到不同粒径的散射光强、散射相函数,然后利用COMS相机对激光拍摄得到其散射图像,利用散射图像的灰度值与0~5μm之间加权平均的粒子散射相函数值作对比,比较程序实现的可行性。结果得到了0~5μm之间微粒的散射光强以及相应的散射相函数以及激光灰度图像在72°到108°的灰度值。结论通过图像灰度值与散射向函数的曲线对比,证明了程序的可行性。